Contact Us

Wuxi Yinghao Technology Co.,Ltd

Add:NO.10,Qintangjin Road, New Century Industrial Park of Chaqiao, Anzhen Town

Tel:86-510-88100630

Mobile:86-13861892371

Fax86-510-88101329

email:chnxinchen@gmail.com

Home > Exhibition > Content
Precautions during use of electric scooters Sep 12, 2018

Proper operation is essential for the proper functioning of the electric scooter and for the service life of the main components such as the motor, battery, charger and controller. When the electric scooter runs out of power, it must be recharged before use. When charging, the red indicator light on the charger indicates that the charging is normal. Before the battery is fully charged, the green indicator light is on, and the green light is on and then charged for 1-3 hours.

 

When the electric scooter is charging, it is forbidden to open the power lock to prevent the charger from being burned. If the temperature is higher than 42 °C or lower than -10 °C, the battery life will be shortened. Therefore, the battery should avoid the sun when the temperature is high in summer. Direct. When the temperature is low in winter, the battery should be placed indoors.

 

In use, do not disassemble the electric scooter electrical appliances and related components at will; the motor does not need to be adjusted during normal use, only need to carry out some surface dusting and other cleaning work, do not add lubricant to the transmission components. The controller has been adjusted to the best condition when the electric scooter is shipped from the factory. As an electronic component, special attention should be paid to waterproofing to avoid malfunctions such as short circuit.

 

When the electric scooter charger is working, confirm the positive and negative voltages. When charging, first insert the battery plug. When plugging in the power plug, pay attention to ventilation when charging. The cooling holes should not be covered. Do not put together with flammable materials during charging to avoid potential safety hazards. At the same time, the charger should be placed together with other digital electronic products during charging to avoid mutual electromagnetic interference; avoid charging in high temperature and high humidity environment.https://www.yinghaotechnology.com/