Contact Us

Wuxi Yinghao Technology Co.,Ltd

Add:NO.10,Qintangjin Road, New Century Industrial Park of Chaqiao, Anzhen Town

Tel:86-510-88100630

Mobile:86-13861892371

Fax86-510-88101329

email:chnxinchen@gmail.com

Home > News > Content
Safe Use Of Electric Bike Steps Jun 22, 2017

Safe use of Electric Bike steps

 Electric Bikes are mainly powered by electric vehicles, driven by motor-driven wheels, we produced Electric Bikes, to meet the road traffic, safety regulations require vehicles, Electric Bikes main advantages include: its own does not discharge harmful gases , Less harm. For the use of Electric Bikes, need to follow what operation, together to find out about it.
There are steps to safely use electric bikes
In the daily before the car, the first check the power can be rich, electric car before driving, the function can be fine, the screws can be loose, there are problems, to be real-time cleaning, check the completion of certainly no problems before they can drive.
Charging local sewing or change the charge of the safety wire, you must first unplug the 220V power plug, prohibited live things.
After each stop, you need to close the power switch, pull out the key, the stall switch board to neutral position, and pull the hand brake.
Repair or replace the battery, electrical appliances, then need to close the power switch after the general operation.
Children in the car when playing to unlock the key switch, so as not to form a risk. Check whether the door can be closed.
Charges should be stopped at the time the child can not fight to the center. The total power switch should be closed immediately when anger or other cause is created.
For the use of Electric Bikes, want to be more secure use, you need to pay attention to the details of which, so as to be able to do a better job of Electric Bikes
China's car ownership is still growing rapidly, the current holding less than 100 million, is expected to 2030, the total car ownership will reach 450 million. And suitable for ABS selection is the high absorption of the boiling point of the brake fluid, if the use of low boiling point of the brake fluid, because of easy to produce air resistance and Electric Bikes in a very dangerous state.
  Electric Bike selection brake fluid should follow the following points:
1, the boiling point of not less than 260 ℃, which is to not make the braking efficiency worse, to ensure that the brake system does not occur air resistance;
2, low temperature to ensure reliable work, brake fluid is absolutely not allowed to freeze phenomenon;
3, do not hurt rubber and metal parts;
4, in the long-term preservation and use, in case of cooling, heating, chemical change is small;
5, the boiling point of high moisture absorption, moisture absorption point is relative to the boiling point (water content of 0) and the water content of 3.5% when the boiling point.
  Vehicles that do not have an ABS installation are often locked in an emergency brake. When equipped with an ABS device, the Electric Bike can be prevented from sliding when the brake is in the emergency braking. Therefore, the brake system High calorie. Suitable for ABS selection is the absorption of high boiling point of the brake fluid, if the use of low boiling point of the brake fluid, because of easy to produce air resistance and Electric Bikes in a very dangerous state.